Transport, Storage And Disposal - Stiga MP1 504 Serie Manual Del Usuario

Ocultar thumbs Ver también para MP1 504 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
7.
TRANSPORT, STORAGE AND
DISPOSAL
7.1. TRANSPORT
Whenever the machine is to be handled, raised, transported 
or tilted you must:
• Stop the machine.
• Make  sure  that  every  moving  component  has  come  to 
a standstill.
• Remove the spark plug cap or remove the safety key or 
battery  (on  models  with    a  push-button  electric  starter 
control).
• Wear heavy work gloves.
• Hold the machine in the points offering a safe grip, taking 
into account the weight and its division.
• Use an adequate number of people suitable to the weight 
of the machine.
• Make sure that machine movements do not cause damage 
or injuries.
• Fasten  firmly  to  the  means  of  transport  using  ropes  or 
chains  to  prevent  it  from  tipping  over  causing  damage 
and fuel leaks.
7.2. STORAGE
When the machine is to be stored away:
• Start  the  engine  in  the  open  air  and  run  it  idle  until  it 
comes to a halt, so that it uses up all the fuel that is left 
in the carburettor.
• Clean the machine thoroughly.
• Check the integrity of the machine.
Store the machine:
• in a dry place;
• protected from inclement weather;
• In a place not accessible to children;
• Making  sure  that  keys  or  tools  used  for  maintenance 
are removed.
NOTE The machine must be stored safely and securely to
prevent any accidental or unwanted contact with people, chil-
dren or animals.
EN - 5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mp1 554 serie

Tabla de contenido