Adjusting The Door - Gaggenau BO 450 612 Manual Del Usuario

4.
Screw the appliance into place. Remove the
transportation lock from the door.

Adjusting the door

For precise alignment, the appliance door can be slightly
adjusted.
For this purpose, slightly pull out the appliance from the
built-in cut-out. At the top of the appliance there is an
oval opening located on the hinge side. Slightly loosen
both screws (Inbus 5 mm), but do not remove them!
All manuals and user guides at all-guides.com
Align the door via the lateral screw (Torx 20).
Tighten both screws (Inbus 5 mm) again.
Notes
▯
▯
▯
Preparing Kitchen Units
The alignment of the appliance door can be adjusted
via the upper hinge, in order to achieve a precise gap
size of the top edge of the door to the upper air
output.
The height of the door cannot be adjusted.
The device door is already aligned when the appliance
is delivered. You do not normally need to align the
door.
en-us
9