Care And Maintenance; Troubleshooting; Corrective Action - Style selections 813SLK01V Manual De Instrucciones

CARE AND MAINTENANCE

• After installation, clean with a mop or vacuum cleaner. If water or cleaning fluid is required, make
sure that the minimum is used to prevent fluid from penetrating into joints and expansion gaps. Do
not pour pails of water on your floor to clean. Excessive water can cause damage to your subfloor.
• For dry maintenance, we recommend cleaning every day and a dust mop or vacuum cleaner with
a soft bristle brush only.
• For wet maintenance, we recommend weekly or monthly use of a damp mop procedure with a
diluted neutral detergent or with a regular vinyl cleaner. Avoid harsh cleaning products that may
damage the floor and make sure to dry completely.
• Care should be taken to keep moisture from collecting on either side of vinyl floor to prevent the
growth of mold and mildew. If your floor has been exposed to excessive water, for example by
accident or flooding, remove the water as soon as possible by moping and ventilate the room. A
dehumidifier should be promptly turned on in the room to reduce the moisture level to normal.
• In order to keep the appearance of the flooring, all spills should be wiped up immediately.
• It is not recommended to use wax on vinyl planks as this can cause a slip hazard.
• Avoid exposure to direct sunlight for prolonged periods. During peak sunlight hours, the use of the
drapes or blinds is recommended.
• Place a suitable mat at outside entrances to reduce the amount of dirt, water and sand brought
into your home.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Bulging at joints. The floor was flooded.
Always clean the floor with a dripping
wet mop.Too much moisture is on the
subfloor.
Flooring gap. The paving area is too large.
Abnormal flooring The subfloor is uneven.
noise. Not enough expansion gaps are left.
Flooring arching. Not enough expansion gaps are left.
Transition profile is not settled as required.
Expansion gap is blocked.
Foreign bodies are left under the flooring.
The old flooring is arched.
Surface damage. Artificial damage, resulting in
scratches, surface peeling off, edge
collapse, etc.

CORRECTIVE ACTION

Moisture-proof treatment shall be
done well.Clean the floor with a
wrung out mop.Pay attention to turn
off the tap to avoid floor flooding.
Add transition profile per 10m length
of paving area.
Correctly install according to the
specification.
Level the ground as required.
Correctly install according to the
specification.
Correctly install according to the
specification.
Avoid leaving foreign matters in the
expansion gap.
If the old flooring has the risk of
arching, remove the original flooring
before installing this product.
Handle and install the flooring with
care. Avoid falling sharp tools or
heavy objects to damage the surface.
Move furniture or heavy objects
without dragging.
10