Thank you for your interest in our products. This manual will
help you to master the operation and use of the RB22. This
manual should be read and studied to ensure that the user
understands the operation of the RB22. Please read the
Safety Information Manual before use.
Disclaimer
We strive for the accuracy and completeness of this
manual, but no warranty is given on its content. All the
specifications and designs are subject to change
without prior notice due to continuous technology
development. No part of this manual may be copied,
modified, translated or distributed in any form without
our prior written authorization.
The third-party products referred to in this manual are
property of those third parties. We do not guarantee
their accuracy, validity, timeliness, legality or
completeness.
USER NOTICES
SAFETY:
The user should be aware of and understand the
general hazards in operating a two-way radio
transceiver. We cannot guarantee the safety and
operation of our transceiver with aftermarket
accessories unless they have been tested and sold by
us.
Our transceiver should be maintained and serviced by
a qualified two-way radio dealer and their technical
staff. Failure to do so may violate our warranty.
This manual applies to the model,
RB22 series digital handheld.
WARNING:
No two-way radio transceiver including ours shall be
operated including powered on in hazardous areas
such as explosive atmospheres including Inflammable
gas, dust particles, metallic powders, grain dust, etc.
This shall include confined spaces where these
hazards exist, in areas where blasting or blasting
products are in use or stored, and while fueling at
refueling centers. In any of these conditions or where
hazards exist, the transceiver shall be powered off.
NPRECAUTIONS
Observe the following precautions to prevent fire,
personal injury and transceiver damage.
•Do not modify or attempt to adjust this transceiver for
any reason.
•Do not expose the transceiver to direct sunlight for
ong periods, nor place it close to a heat source.
•Do not place the transceiver in a dusty, humid or wet
area, nor place on unstable surface.
•If an abnormal odor or smoke is detected coming
from the transceiver, switch OFF immediately and
remove the battery pack from the transceiver. Contact
your dealer.