ARDES AR5C40PH Folleto De Instrucciones página 16

INSTRUCTIONS FOR USE
Place the fan on a flat, dry and stable surface, and insert the plug of the
fan in a socket. Select the desired speed by by setting the knob (12):
I =minimum speed II =medium speed III =maximum speed O =OFF
OSCILLATION:
For the automatic oscillation from right to left press the knob (13) placed
on top of the motor. To disable it, pull up the knob.
ADJUSTMENT HEIGHT.
Loosen the height adjustment knob (16), then set the desired height for
the fan. Tighten firmly the knob after adjusting the rod.
N.B: this operation must always be carried out while the fan is
turned off.
ADJUSTMENT VERTICAL INCLINATION
Loosen the vertical slope screw (8) then adjust the head of the fan
according to the angle you want. Tighten the screw (8) once the head of
the fan is adjusted.
N.B: this operation must always be carried out with the fan turned
off.
MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan
and unplug it.
Ensure that the fan is switched off from the supply mains before
removing the guard.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
Reinstall the guard after cleaning and before connecting the plug
tot he mains.
When you do not use it, after cleaning it, store the fan in a dry place.
16