Mobiclinic Nilo Instrucciones página 19

EN ES
1
STEP
1-1. Attach the 3 pole brackets
in each position on the base as shown in the picture.
1-2. Use 3 medium screws (M8x16) to join the post and
bracket brackets.
2
STEP
2-1. Attach the post to the top of the 3-piece bracket.
2-2. Use 6 large bolts and flange nuts (M6) to connect
the pole to the 3 pole brackets. Tighten the bolts and
nuts.
3
STEP
Place the tank cover
tank cover on the bracket.
4
STEP
REFLECTOR ASSEMBLY
Warning: Remove the protective
cover protective cover before
assembly.
5
STEP
5-1. Place 6 large flat
flat washers on 3 spacers
of the reflector.
6
STEP
Fasten the reflector with 3
large flat washers and 3 wing nuts.
6
Perno
Screw
STEP 3
Tank
cover
STEP 5
PASO 5
Space
Re ector
Nilo
STEP 1
Soporte
Pole
de correo
brackets
Soporte
Bracket
STEP 2
STEP 2
PASO 2
Poste
Post
Perno
Bolt
Tuerca
Nut
STEP 4
PASO 4
PASO 3
Cubierta
tanque
STEP 6
Wing
nuts
Reflector