Sanyo HT27745 Manual De Instrucciones página 12

REMOTE CONTROL KEYS (Continued)
”
•
11
12
”
Caption Key—Press to select analog or digital cap-
tioning. The Analog Caption modes are: CC1, CC2,
Quikcap, and OFF . The Digital Caption modes are:
Digital CC1 ~ CC6, Quikcap, and OFF .
•
Channel Scanning ( ( CH LM) Keys—Press L (up)
M (down) keys to tune to the next higher or lower
channel in the Channel Scan Memory database. The
scanning loop includes analog channels, digital chan-
nels, and all A/ V inputs.
11
Pix Shape Key—Use this key to change the video
display format. Available options depend on signal
received and the broadcast's aspect ratio. They may
include: Letter box, Zoom, and Normal for HT27745;
Full, Zoom1/2, and Normal for HT28745.
Model HT27745 Model HT28745
Letter Box—Black Normal—Black
borders appear at borders appear at
the top and bottom the sides, of the
of the screen. screen.
Note: 16:9 image Note: 4:3 image
without distortion without distortion
on a 4:3 screen. on a 16:9 screen.
12
Need help?
Visit our Web site at
13
14
15
16
17
18
Zoom—Enlarges
image (some of the
top and bottom may
be clipped when
using Zoom 1 or
Zoom 2 modes).
www.sanyoctv.com 1-800-877-5032
or Call
12
Audio Key—Press to select the desired audio mode
(if available): DIGITAL: Main, Sub1, Sub2, Sub3, etc.;
ANALOG: Stereo, Mono, SAP .
13 Sleep Key—Press this key, then press the "0" key to
set the Sleep Timer. The desired time can be set from
30 minutes up to 3 hours in 30 minutes increments.
Sleep Timer will switch off the DTV automatically.
NOTE: The Sleep Timer cancels when the DTV is turned off
or if a power failure occurs.
14
Mute Key—Press once to minimize the volume. Press
again to restore.
NOTE: This key will not mute sound from the audio out
.
jacks
15
Enter Key—Press this key to select an option from
the menu system, when required.
16
Exit Key—Press this key to exit from the menu
system.
17
Volume (VOL – +) Keys—Press the – – + + keys to adjust
volume. The screen displays a left or right red arrow
that blinks as many time as you press the Vol – – + +
keys.
Reset Key—Press twice to restore factory settings.
18
The DTV will automatically start Channel Search and
clear all customized settings.
NOTE: The Reset Function includes a channel search.
Current Digital and Analog channel databases will be
deleted and new ones created by the Channel Search
process. To receive Digital Cable channels, see page
14 for Digital Cable Search.
These features will reset to factory defaults:
• Picture/Sound Adjustments: Color, Tint,
Contrast, Brightness, Sharpness, Color Enhancer,
Bass, Treble, and Surround Sound
• Channel Memory —Digital/Analog channel
database will be replaced
• Initial Channel to OFF
• Analog Audio to Stereo
• Captioning to OFF
• V-Guide to OFF
• DTV Speakers to ON
• Digital Audio Output to Dolby Digital
• Scan Velocity to HIGH
• Menu Language to English
• Auto Clock / Sleep Timer (if previously set)
• Any Video mode to DTV mode
If desired, personal settings can be made again
using the menu options.