Dtv Back-Jacks Locations & Functions; Glossary Of Cables - Sanyo HT27745 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HDTV BACK— JACKS LOCATIONS AND FUNCTIONS

Œ
Component Video Input (COMPO 2)—Connect
digital video equipment to the Y, Pb, Pr and Video 2
Audio L/R jacks. These jacks will automatically detect
the type of signal being received (HDTV, EDTV, or
SDTV). (See page 9.)

S-Video (Video 1 and 2) Input—To enhance video
detail, use the S-Video (Video 1/2) jacks instead of the
Video jacks, if available on your external equipment.
(S-Video connections will override connections to the
Video 1/2 input jacks.) (See page 10.)
Ž
Digital Audio Output—Use an Optical Audio cable to
connect the Digital Audio Output to an advanced
stereo home theater system equipped with Dolby
Digital 5.1. (See page 9.)

Analog Audio Out (L/R) Jacks—Connect external
audio equipment here. (See page 10.)
Audio Cables—Provides analog left /right
audio for your external equipment connec-
tions.
Component:Y, Pb, Pr—Use these cables to
connect your component equipment. This
connection provides the best picture, but
does not include sound. (Cable colors:
Y = green, Pb = blue, and Pr = red.)
Composite Audio/Video (RCA type)—
Use these cables for standard analog
audio/video connections. Normally cables
are color coded: Yellow for Video, White for
(L) Audio, and Red for (R) Audio.

Œ


GLOSSARY OF CABLES

Ž

Component Video Input (COMPO 3)—Connect
digital video equipment to the Y, Pb, Pr and Audio 3
(L/R) jacks. These jacks will automatically detect the
type of signal being received (HDTV, EDTV, or SDTV).
(See page 9.)
Audio/Video Input (VIDEO1/VIDEO2)—Connect
standard video equipment here. (See page 10.)
S-Video1/2 connections override the AV1/2
NOTE:
video composite connections.
Analog Antenna Input (UHF/VHF/CATV)—Connect
an RF antenna, cable, or satellite receiver to this ter-
minal as shown on page 5.
®
Digital Antenna Input—Connect an RF antenna to
this terminal as shown on page 5.
Service Terminal—For technical use only.
Coaxial Cable—Used to connect a signal to
your digital or Analog RF Antenna In terminal.
Optical Digital Audio—Use this cable to
connect the DTV 's digital audio output to a
multi-channel audio receiver.
S-Video Cable—This cable provide separate
luminance and color signals for higher reso-
lution and better picture quality. Use this
cable instead of the regular composite video
cable (RCA type), when available.
NOTE: None of these cables are supplied with this DTV.
Need help?
Visit our Web site at
www.sanyoctv.com
1-800-877-5032
or Call
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ht28745

Tabla de contenido