Initializing The Hard Disk - Sanyo VA-EXH Manual De Instrucciones

e00_l8hcb_us_7.book Page 10 Monday, March 7, 2005 3:54 PM
2

INITIALIZING THE HARD DISK

Initializing the hard disk
Use the setting screen on the digital video recorder to initialize
the hard disk.
The capacity of the built-in hard disks is displayed as DISK 1
and DISK 2. The hard disk capacity for the external storage
unit is displayed as EX-DISK 1 to 4.
Initialization must always be performed after expanding the
hard disk.
All important recordings should be copied to CompactFlash
cards or other storage media before expanding the hard
disk.
Initializing the hard disk at power on
1
Turn on the DVR to display the <HDD
SET> screen.
"NEW" is displayed to
the right of the hard
disk capacity for new
hard disks.
To initialize a recently expanded hard disk, select "NEW DISK
INITIALIZE".
To initialize all connected hard disks, select "ALL DISK
INITIALIZE".
Mirroring commences if "MIRRORING" is set "ON."
2
Then turn the shuttle dial clockwise.
The <WARNING> screen is displayed. "NO" is flashing.
<HDD SET>
DISK 1 : 160GB NEW DISK 2 : 160GB NEW
EX-DISK 1 : 160GB NEW EX-DISK 2 : 160GB NEW
EX-DISK 3 : 160GB NEW EX-DISK 4 : 160GB NEW
NEW DISK INITIALIZE ->
PLEASE INITIALIZE THE NEW DISK
MIRRORING : OFF
PLAYBACK DRIVE : ***
CAUTION : RECORDING SPEED WILL BE
LIMITED BY MIRRORING !
ALL DISK INITIALIZE ->
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
10
3
Turn the jog dial to select "YES" and
then turn the shuttle dial clockwise.
The "HDD INITIALIZING !" screen is displayed and the hard
disk is initialized.
When initialization is complete, the live image is displayed.
Initializing the hard disk in use
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
MENU
2
Turn the jog dial to select "3.GENERAL
SET" and then turn the shuttle dial
clockwise.
The <GENERAL SET> screen is displayed.
3
Turn the jog dial to select "5.HDD SET"
and then turn the shuttle dial clockwise.
The <HDD SET> screen is displayed.
DISK 1
EX-DISK 1 : 160GB
EX-DISK 3 : 160GB
NEW DISK INITIALIZE
PLEASE INITIALIZE THE NEW DISK
MIRRORING
"NEW" is displayed to
PLAYBACK DRIVE : ***
the right of the hard
CAUTION : RECORDING SPEED WILL BE
disk capacity for new
hard disks. ALL DISK INITIALIZE
To initialize a recently expanded hard disk, select "NEW DISK
INITIALIZE".
To initialize all connected hard disks, select "ALL DISK
INITIALIZE".
<HDD SET>
: 160GB DISK 2 : 160GB
EX-DISK 2 : 160GB
EX-DISK 4 : 160GB
->
: OFF
LIMITED BY MIRRORING !
->
English