LaserLiner AirMonitor CO2 Manual De Instrucciones página 10

Carbon dioxide indicator display (CO
PPM
< 801
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Store the device in a clean and dry place.
Maintenance work may only be carried out by qualified maintenance personnel.
Maintenance is required if the device is damag ed in any way, for example, if the
power cable or plug are damaged, there has been ingress of liquids or foreign
bodies into the device, if the device has been rained on or subjected to moisture,
if it is no longer functioning correctly, or has been dropped.
Local operating restrictions – for example, in hospitals, aircraft,
!
petrol stations or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or
be subject to hazards or interference.
EN
10
PPM
> 801~1000
)
2
PPM
> 1001~1400
Alarm signal tone
Ventilation
required
PPM
> 1401~9999
Alarm signal tone
Ventilation
urgently required