Faucet Installation - Price Pfister 42 Serie Manual Del Usuario

Ocultar thumbs Ver también para 42 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Thank you for purchasing this Price Pfister product. All Price
Pfister products are carefully engineered, and factory tested
to provide long trouble-free use under normal conditions. This
product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this
product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3
3 TOOLS RECOMMENDED
• Plumber's putty
• PTFE Plumber's Tape
• Adjustable wrench
• Pliers
• Cloth
Your installation may require new supply lines and / or shut-off valves or other additional
tools.

FAUCET INSTALLATION

4
4 ROD CONNECTION
Insert Lift Rod (4A) into hole at the back of Faucet Body (4B).
ENGLISH
• Slotted screwdriver
• Flashlight
4A
4B
2
5
5F
5B
5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTING
Ensure that Seal Ring (5A) is pressed onto Base Ring (5B). Ensure that Ring (5F) is
placed onto the base of Faucet Body (5G). Place a bead of plumber's putty in the groove
along the bottom outer edge of Seal Ring (5A). Place Base Plate and Base Ring on top
of Hole (5C) of sink. From above sink, insert Threaded Shank (5D) and Supply Tubes
(5E) through Hole (5C) on sink.
6
6B
6 INSTALLING FAUCET WITH DECK PLATE
Ensure that the Plastic Putty Plate (6A) is pressed on the Deck Plate (6B). Ensure that
Ring (6F) is placed onto the base of Faucet Body (6C). Place a bead of plumber's putty
in the groove along the outer edge of the Putty Plate (6A). Assemble Deck Plate (6B)
and Putty Plate (6A) to Faucet Body (6C). With the handle and spout facing forward,
carefully install the Faucet Supply Tubes (6D) through the center hole of sink (6E).
5G
5D
5A
5E
5C
6C
6D
6F
6A
6E

Publicidad

Tabla de contenido
loading

Tabla de contenido