osann Eno360 Manual De Instrucciones página 23

Isofix connectors
• Push the insertion aids through the slit in the
cushion between the backrest and seat and into
the Isofix holders.
• When doing this, the flat side must be facing
downwards. This step is not necessary if the vehi-
cle already has fixed insertion aids.
• Press the buttons on the Isofix connectors on both
sides to extend these.
• Slide the Isofix connectors into these insertion aids
and press them in until you hear them lock in place.
• The indicators on both sides turn green only
when the connections are made correctly. Press
the child car seat against the backrest until it is
securely in position.
Additional fastening with top tether
(Group 0+/1)
• Remove the top tether from the pocket.
• To release the top tether, press the grey button
with one hand and pull the side of the belt anchor
to the required length with the other hand.
• To fix the top tether, clip the anchor to the fixing
point on the car seat and pull it as tight as possible.
The display does not turn green until the belt is
tightened sufficiently.
Comfort insert and baby insert
Comfort insert
up to max. 13 kg
- 23 -
Baby insert
(under comfort insert)
up to max. 9 kg
EN