General Safety Instructions - LaserLiner SuperPlane-Laser 3D Pro Manual Del Usuario

Completely read through the operating instructions, the "Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
laser device is passed on, this document must be passed on with it.
Function / Application
Three-dimensional laser with three 360° laser circles.
– The slope-mode feature is an extra that permits gradients to be laid out.
– Straight forward plumb function using laser crosses
– Optimised for work close to the ceiling
– Out-Of-Level: is indicated by optical signals when the unit is outside its
self-levelling range.
– With the magnetic clamp and wall bracket the device can be used as a
standalone unit, in a combination as well as in horizontal and vertical position.
– Automatic levelling range 2.5°, Accuracy 0.2 mm / m

General safety instructions

– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach
of children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
Safety instructions
Using class 2 lasers
12
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014/AC:2017
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014/AC:2017