General Safety Instructions - LaserLiner AutoCross-Laser 2 XP Manual Del Usuario

Read the operating instructions and the enclosed brochure „Guarantee
!
and additional notices" completely. Follow the instructions they
contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Function / Application
Cross-line and 5-point laser for vertical and horizontal alignment
– The slope-mode feature is an extra that permits gradients to be laid out.
– Individually switchable laser lines
– The 5 laser points are arranged each offset by 90° on the horizontal
and vertical planes of the laser lines. 3 points of intersection, consisting
of a laser line and point, are formed at the end of the laser lines.
– The plum and ceiling points allow markings to be easily transferred from
– Out-Of-Level: Is indicated by optical and acoustic signals
when the unit is outside its self-levelling range.
– Automatic levelling range 3°, accuracy 2 mm / 10 m

General safety instructions

– Attention: Do not look into the direct or reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the beam.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must only be used in accordance with its intended purpose
and within the scope of the specifications. Modifications or changes
to the device are not permitted, this will otherwise invalidate the
approval and safety specifications.
10
GB
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2007-10
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 510-635 nm
EN 60825-1:2007-10