General Safety Instructions - LaserLiner ThermoSpot One Manual De Instrucciones

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end of
these instructions. Follow the instructions they contain. This
document must be kept in a safe place and if the laser device
is passed on, this document must be passed on with it.
Function / Application
The ThermoSpot One is a contactless infrared temperature measuring
device with integrated laser. Non-contact temperature measurement
of surfaces is realised by measuring and evaluating the amount of
electromagnetic energy in the infrared wavelength range.

General safety instructions

– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach
of children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail
or the battery charge is weak.
– Please ensure compliance with the safety regulations set out by local and
national authorities with regard to the correct and proper use of the device.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars)
– Do not use the laser at eye level (1.40...1.90 m).
– Tampering with (making changes to) the laser device is not permitted.
06
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014/AC:2017