General Safety Instructions; Special Product Features - LaserLiner AutoCross-Laser 2 Plus Manual De Instrucciones

Read the operating instructions and the enclosed brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain. This document must be kept in a safe place
and if the laser device is passed on, this document must be passed on with it.
Function / Application
Cross-line laser vertical and horizontal alignment
– The slope-mode feature is an extra that permits gradients to be laid out.
– Individually switchable laser lines
– Out-Of-Level: Is indicated by optical and acoustic signals
when the unit is outside its self-levelling range.
– The magnetic wall bracket allows the unit to be used as a stand-alone device
or in combination with other devices – on walls, and attached to magnetic objects.
– Automatic levelling range 3°, accuracy 0.2 mm / m

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope
Do not stare into the beam!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
– Do not use the laser at eye level (1.40 ... 1.90 m)
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.

Special product features

Automatic alignment of the device with a magnetically dampened pendulum system.
The device is brought into initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum lock during transport.
Special high performance laser diodes generate even brighter laser lines as units with
PowerBright Technology do. They remain visible over longer distances, in bright ambient
lighting conditions and on dark surfaces.
RX-READY technology enables line lasers to be used even in unfavourable light conditions.
The laser lines pulsate at a high frequency and this can be picked up by special laser
receiversover long distances.
Laser radiation!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014
AutoCross-Laser 2 Plus
EN 07