Features; Package Contents; Wiring - LEGRAND C2G C2G30022 Manual Del Usuario

Dual HDMI HDBaseT + RS232 over Cat Extender Single Gang Wall Plate Transmitter - 4K 60Hz

Features

Two HDMI inputs, supports resolutions up to 4K@60Hz 4:2:0 8bit and HDCP 2.2 compatibility
•
Supports signal transmission up to 35m/115ft for 4K and 60m/197ft for 1080P via a single
•
Cat 5e/6 cable
Supports signal transmission up to 40m/131ft for 4K and 70m/230ft for 1080P via a single
•
Cat 6a/7 cable
Supports one-way PoC, the transmitter can be powered by the receiver with PSE module.
•
Supports RS232 pass-through via HDBT port
•
Supports firmware upgrade through RS232 port, and can be set through the DIP switch
•
Supports automatic switching, front panel button control and API Commands
•
control

Wiring

Warnings:
Before wiring, disconnect the power from all devices.
•
During wiring, connect and disconnect the cables gently.
•
Steps for device wiring:
1. Connect HDBT OUT port of the transmitter to HDBT IN port of an HDBT
receiver via a single Cat 5e/6/6a/7 cable.
2. Connect HDMI sources to HDMI IN 1-2 ports of the transmitter.
3. Connect an HDMI display to HDMI OUT port of receiver.
4. Connect the power adapter to an HDBT receiver with PSE module (such as
C2G30015).
5. Power on all attached devices.
6. Select a desired video source through automatic or manual switching function.

Package Contents

•
•
•
•
•
3
1 x Transmitter
1 x Phoenix Male Connector (3.5mm, 2 Pins)
1 x Phoenix Male Connector (3.5mm, 3 Pins)
1 x 1 – Gang US Socket Cover, White (with
Screws)
1 x Manual
(us)
(us)