Technical Data; Noise/Vibration Information - Bosch GKS 190 Professional Instrucciones De Servicio

26 Set of screw clamps*
27 Guide-rail adapter*
28 Guide rail*
29 Connection piece*
30 Vacuum hose*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Circular Saw
Article number
Rated power input
No-load speed
Cutting depth, max.
— for 0˚ bevel angle
— for 45˚ bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter
Blade thickness, max.
Mounting bore
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Bosch Power Tools
3_GKS190_Page5to40.indd 35 3_GKS190_Page5to40.indd 35

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 96 dB(A);
Sound power level 107 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
tainty K =1.5 m/s
GKS 190
The vibration emission level given in this infor-
Professional
mation sheet has been measured in accordance
3 601 F23 0..
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
W 1200
It may be used for a preliminary assessment of
/min 5500
exposure.
The declared vibration emission level repre-
mm 67
sents the main applications of the tool. However
mm 49
if the tool is used for different applications, with
•
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
mm 302 x 140
cantly increase the exposure level over the total
mm 184
working period.
An estimation of the level of exposure to vibra-
mm 2.0
tion should also take into account the times
mm 16
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
kg 4,1 tal working period.
Identify additional safety measures to protect
/ II
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Assembly
Mounting/Replacing the Saw Blade
<2.5 m/s
h
2
.
Before any work on the machine itself, pull
the mains plug.
When mounting the saw blade, wear protec-
tive gloves. Danger of injury when touching
the saw blade.
F 000 622 290 | 04.2009
English | 35
2
, Uncer-
17.04.09 16:58:24 17.04.09 16:58:24