Consumer Information - Electrolux Clario Manual De Instrucciones

14
English
T R O U B L E S H O O T I N G A N D C O N S U M E R I N F O R M A T I O N
Troubleshooting
The vacuum cleaner does not start
1 Check that the cable is connected to the mains.
2 Check that the plug and cable are not damaged.
3 Check for a blown fuse.
The vacuum cleaner stops
1 Check whether the dust bag, s-bag™ is full. If so, replace it
with a new one.
2 Is the nozzle, tube or hose blocked?
3 Are the filters blocked?
Water has entered the vacuum cleaner
It will be necessary to replace the motor at an authorised
Electrolux service centre. Damage to the motor caused by the
penetration of water is not covered by the warranty.

Consumer information

Electrolux decline all responsibility for all damages arising from
any improper use of the appliance or in cases of tampering with
the appliance.
This product is designed with the environment in mind. All
plastic parts are marked for recycling purposes. For details see
our web site: www.electrolux.com
If you have any comments on the cleaner or the Instructions for
Use booklet please e-mail us at: floorcare@electrolux.com
If you can´t find dustbags or accessories to your Electrolux vacuum
cleaner, please visit our website at www.electrolux.co.uk or call
08706 055 055.