Parts / Tools; Parts Provided; Tools Needed - LG WCES6428F Manual Del Usuario

us_main.book.book Page 7 Thursday, December 9, 2021 8:44 AM
• Remove one screw from the left and right sides as shown. These screw holes will be used to mount the
cover brackets. Install the cover brackets on the sides of the oven with the provided self-tapping screws.

Parts / Tools

WARNING
• Mounting screws must be used. Failure to do so
can result in the oven falling out of the cabinet
causing serious injury.

Parts Provided

4X14 6 Wood screws for mounting (4 needed
a
for installation and 2 extras)
4X24 6 Wood screws for mounting (for flush
b
installation)
4X22 2 Self-tapping screws for cover bracket
c
2 Cover brackets for flush installation
d
4X10 2 Screws for bottom decorative trim
e
Bottom decorative trim
f
Parts Not Provided
Junction Box
a
Wire Nuts
b
3/4" Conduit Connector
c
36" (91 cm) of String
d

Tools Needed

Phillips screwdriver
a
Flat-blade screwdriver
b
Tape measure
c
Pliers
d
Drill
e
Gloves
f
INSTALLATION 7