Rear Panel; Universal/Multimedia Remote Control - Sanyo DS31520 Manual Del Propietário

REAR PANEL

AUDIO VIDEO
AUDIO
INPUT
OUTPUT
VIDEO
(MONO)
L L
AUDIO
R R
Audio Output Jacks
Connect external audio equipment here (see
page 11). The audio output level is not
adjustable by the television volume controls.
Use your external equipment to adjust the
volume level.

UNIVERSAL/MULTIMEDIA REMOTE CONTROL

Operates your TV, VCR, Cable Converter Box, DVD, and Satellite Receiver. Simply program
it according to the directions on pages 7~9. Then press the proper function key (VCR, TV,
CABLE, DVD, SAT, or AUX) to set the remote control to operate each product. The AUX
mode can be programmed to operate a VCR, Cable Box, DVD, or Satellite Receiver. Also,
this remote offers large Channel, Volume, and Power keys that glow-in-the-dark.
INSTALLING BATTERIES (2 AA not included)
1. Remove the battery cover by pressing the tab and tilting
the cover upward. Insert batteries. Make sure you match
+
/ signs on the batteries with marks inside the
remote control.
2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove batteries from the remote control if it will not
be used for a month or more. Weak batteries may leak,
causing damage to the remote control.
IMPORTANT NOTE: Spent or discharged batteries must
be recycled or disposed of properly in compliance with
all applicable laws. For detailed information, contact
your local County Solid Waste Authority.
Audio/Video Input Jacks
Connect external video equipment
here (see page 12).
UHF/VHF/CATV
75Ω
S-VIDEO
INPUT
Cable / Antenna Input
Terminal (75 ohms)
S-Video (Super-Video) Terminal
To enhance video detail use the S-Video
jack instead of the Video jack, if available
on your external video equipment.
(S-Video AV1 connection will override
a Video connection.)
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
See pages 11~12
before connecting
external audio/video
equipment.
Cables are not
supplied for connect-
ing your external
equipment.
A solid Blue screen
with the word Video
displayed means that
the Video mode is
selected, but no signal
is being detected at the
Video jack. Check con-
nection, and turn on
external equipment.
Be sure batteries are
installed correctly.
Point the remote
control toward the
equipment you want to
operate. Objects
between the remote
control and the equip-
ment may cause
misoperation of the
remote control
function.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
5