Maintenance And Cleaning; General Cleaning And Servicing; Replacement Parts/Accessories; Waste Disposal And Environmental Protection - Grizzly Tools GHS 2842 B Traducción Del Manual De Instrucciones Original

GB
Avoid adjusting the pressure plate
too far and causing unnecessary
wear.
Maintenance and
cleaning
Leave all work not described
in this manual to an authorised
customer service centre. Only
use original parts.
Wear hand protection when work-
ing on the blade cylinder.
Switch the shredder off, unplug it
form the mains, and wait for the
blade cylinder to come to a com-
plete stop before working on it.
General cleaning and
servicing
Do not spray water onto the
shredder. Electric shock hazard.
• Always keep the shredder, wheels and
air vents clean. Use a brush or cloth to
clean it, avoid cleaners and solvents.
• Always check that the shredder and
especially the guards are not worn
down or damaged but firmly attached
before use. Check that the nuts, bolts
and screws are tight.
• Check the covers and guards for dam-
age and improper attachment. If nec-
essary, change the components
• Keep the shredder in a dry place out
of children's reach. Do not cover the
shredder in nylon bags, as moisture
may develop.
86
Replacement parts/
Accessories
Spare parts and accessories can be
obtained at
www.grizzly-service.eu
If you have any other questions, contact
the "Service-Center" (see „Service-
Center").
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Hand over the device at an utilization
location. The plastic and metal parts em-
ployed can be separated out into pure
materials and recycling can be implement-
ed. Ask your Service Center about this.

Guarantee

• We provide a 24-month guarantee on
this unit. This equipment is not suit-
able for commercial use. Commercial
use will invalidate the guarantee.
If you have reason to launch a claim
on guarantee, please call our ser-
vice centre. They will give you fur-
ther information on the complaints
management process.
• The guarantee does not cover dam-
age from natural wear, overloading or
improper use. Certain components,
such as the blade cylinder and pres-