Eco Function - EQUATION DF-HT5363P Instrucciones De Montaje

ECO FUNCTION

FR
- In working condition, press
up.
ES
a) ECO temperature setting has four levels: 18°C / 22°C / 26°C / 30°C.
- When entering into ECO mode, the setting temperature before entering is still applicable.
PT
When the ambient temperature is lower than the setting temperature for less than 2 °C,
the machine will work with power I(1700W); When the ambient temperature is lower than
IT
the setting temperature for no less than 2°C, the machine will work with power II(2500W);
If the ambient temperature reach the setting temperature, the heater will turn o , the
EL
low/high heating power light will be o . (The rest of indicators will not be changed.) Then
if the ambient temperature is lower than the setting temperature for 2°C that has been set,
PL
the heating function will be on again with the corresponding heating power indicator will
be on.
Notice:
RU
1. under the continue heating status, when you Press
automatically set to 18°C.
UA
2. allowed to set temperature with hand (18°C / 22°C / 26°C / 30°C ) under the ECO mode, if
you want to continue heating, you should quit the ECO mode rstly.
RO
3. when you operate the ECO function, the
normal.
EN
MEMORY FUNCTION IN STANDBY MODE:
Under the standby mode, press
timer setting) of last using and work accordingly.
BRIGHTNESS OF LED DISPLAY
After working for 1 minute, the brightness of the LED display will reduce to 1/3 of the normal
brightness, in order to avoid the problem of LED display dazzling at night. It will resume to
the normal brightness after operation.
key to shift the product into ECO mode, LED
button, the temperature is
button is invalid but the other function is
key, the unit will memorize the previous settings(except
89
lights