Bell FreeFit BE FREE Manual Del Usuario página 8

QUICKSTART
Trip Timer (TM)
Trip Timer is displayed on the lower screen. It is activated automatically with the bicycle in motion: it is
on when you ride and off when you stop. To display the timer, press the Right button until "TM" appears.
The timer records the total cycling time for each trip. Trip Timer can be reset at any time by pressing
and holding the Left button for two seconds when the "TM" is displayed on the screen. Note: Resetting
Trip Timer will automatically reset Trip Distance and Average Speed.
Odometer (ODO)
Odometer is displayed on the lower screen. Just like a car, it measures distance ridden over time. After
changing the computer battery, ODO will be set to zero. The odometer can be reset to the previous value
by pressing and holding the Left button for two seconds when "ODO" is displayed on the screen.
Average Speed (AVS)
Average Speed is displayed on the lower screen. It represents the average speed while riding. Press the
Right button until the "AVG" appears. The average speed is measured over the total cycling time for each
trip. A figure can be expressed in Km/hr or M/hr. The average speed can be reset at any time by pressing
and holding the Right button for two seconds when the AVS is displayed on the screen.
NOTE: Resetting the Average Speed will automatically reset the Trip Timer and Trip Distance.
Maximum Speed (MXS)
Press the Right button until the "MXS" appears. This display will show the maximum speed during your
ride. Maximum Speed can be reset at any time by pressing and holding the Left button for two seconds
when the MXS is displayed on the screen.
8
FreeFit_Manual4.indd 8 9/14/05 12:37:14 PM