. $ % A 7 5 8 % % 9 & D Q Q M T V R ' ' ' ' ' '
Adjusting DAY/NIGHT Function
The DAY/NIGHT function automatically switches over between COLOR and B/W mode depending on the ambient brightness;
for example, choosing COLOR mode during daytime, and B/W mode for nighttime monitoring with its increased sensitivity in a
darker environment. "AUTO" is preselected by default, which provides an automatic switch feature to detect the ambient
darkness. As appropriate for any specific environment, you can fix the mode to either COLOR or B/W, and adjust the way the
switching function works.
DAY/NIGHT
Selecting DAY/NIGHT Mode
1
1
1
1
Select a mode.
RImage switches immediately after the selection is made.
2
2
2
2
For advanced settings, press the SET button.
REach corresponding settings screen will appear.
All manuals and user guides at all-guides.com
MAIN MENU
LANGUAGE
SET
TITLE
OFF
SYNC
INT
EXPOSURE
SET
DAY/NIGHT
AUTO
WHITE BALANCE
ATW
ALARM
SET
OPTION
SET
PRESET
OFF
MENU
END
MAIN MENU
LANGUAGE
SET
TITLE
OFF
SYNC
INT
EXPOSURE
SET
DAY/NIGHT
AUTO
WHITE BALANCE
ATW
ALARM
SET
OPTION
SET
PRESET
OFF
MENU
END
' ' ' '
For accessing the MAIN MENU, see page 13 – 14.
AUTO: See page 31.
Automatically switches between COLOR and B/W mode depending
on the ambient brightness. (DAY/NIGHT function)
COLOR: See page 32.
Color image on a steady basis; suitable for always bright location or
conditions.
• If you specify this mode, you can forcibly switch between COLOR
and B/W by means of alarm input. (See page 43)
B/W (Black and White): See page 33.
B/W image on a steady basis; suitable when sensitivity is
prioritized.
30
English