Specifications - Sanyo VCC-WD8574 Manual De Instrucciones

) $  H O   T V R ' ' ' ' '  ' 

Specifications

Pickup device 1/3" CCD
Effective pixels 768 (H) x 494 (V), NTSC
Horizontal resolution More than 480 TV lines
Electronic zoom x2.5 (with Alarm Zoom Function)
Internal synchronization/Line lock, V phase
Synchronization
method
adjustment possible
1.0 lx (F1.2, COLOR mode, Normal Gain)
0.5 lx (F1.2, COLOR mode, High Gain)
0.025 lx (F1.2, COLOR mode, x40 electronic
sensitivity increased, Normal Gain)
Lowest image
illumination
0.05 lx (F1.2, B/W mode, Normal Gain)
0.025 lx (F1.2, B/W mode, High Gain)
0.002 lx (F1.2, B/W mode, x40 electronic sensitivity
increased, Normal Gain)
S/N More than 50 dB (with AGC OFF)
Backlight
OFF/Center-weighted metering/ Multi-spot metering
compensation
WIDE-D OFF/ON (For auto iris only)
1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
Electronic shutter
1/10000
Iris function AI/EI
AUTO/OFF, works with auto iris
Electronic sensitivity
boosting
Up to x40 setting possible
Auto Tracing White balance (ATW),
Auto Tracing White balance-All (ATW-A),
White balance One-push (AWC), Manual White Balance (MWB),
Indoor (3200), Outdoor (5600),
Fluorescent lighting (FLUE)
AGC gain HIGH/MID/NORM/Manual
Gamma 0.45/1/MODE1/MODE2
Mirror image effect OFF/Horizontally/Vertically/Horizontally and Vertically
Aperture ON/OFF specifiable
All manuals and user guides at all-guides.com
 ' ' ' '
Privacy masking OFF/ON, Up to 8 spots, Lockable with password
AUTO / COLOR / B/W, specifiable COLOR / B/W
switching sensitivity for AUTO mode, switchable
DAY/NIGHT COLOR / B/W mode working with external terminal
(during COLOR mode), switchable ON/OFF for color
burst for B/W mode.
External x 1, Output x 1, NO/NC switch
ALARM INPUT &
Alarm output: Open Collector, Grounded Emitter with
OUTPUT
18 V/25 mA
Detectable area frame x 5 spot, specifiable location,
Motion sensor
Masking and Area ON/OFF
Camera title OFF/ON, up to 16 characters, adjustable title position
NEGA/POSI inversion OFF/ON
Communications Simplified controller (VAC-70) supported
Power indicator LED-red
Operational
–10 ~ +50°C/below 90% RH (Non-condensing)
temperature/humidity
Power source 24 V ±10% AC, 60 Hz, 12 - 15 V DC
Power consumption 6 W
Weight 420 g
Dimensions
67 x 54 x 128
(W x H x D mm)
• The appearance and specifications of the product are subject to
change without notice.
58
English