TallyGenicom 3860 Guía De Referencia Rápida página 22

Move the home position tractor as necessary to align the paper.
Home-Position
Move the far tractor as necessary to fit your paper.
Put paper in the far tractor and close the door.
3860/80 Quick Reference Guide
All manuals and user guides at all-guides.com
If necessary, position the home-position tractor so that the edge of the
paper aligns with the "0" on the paper scale. Pull the home-position
tractor locking lever forward and adjust the tractor postion.
Locking
Lever
Tractor
Rear View
If necessary, pull the far tractor locking lever forward and adjust the far
tractor's position so that it matches the width of the paper.
Make sure the leading edge of the paper is parallel with the tractor
shafts. Sprocket-feed holes in the paper should engage three to five of
the pins of the tractor belt. Make sure that the same number of pins are
engaged on both tractors. For the rear path, load the paper face down.
Feed Pins
Feed Holes
Rear View
Paper Scale
Paper Scale
21