Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Balancer Shaft Locking Pin,
to be used as OEM 2212825
2
Chain Sprocket Holder,
to be used as OEM 2318117
3
Screws for Chain Sprocket Holder
INTENDED USE
This tool set is designed for locking the balancer shaft and holding the chain sprocket on BMW N20
engines.
SAFETY INFORMATIONS
•
Do not use the set if any parts are missing or damaged.
•
Only use this tool for the purpose for which it is intended.
•
Never lay tools on the vehicle's battery. This may short the terminals together.
•
Be careful when working on running engines. Loose clothes, tools and other things can be caught up
in revolving parts which may lead to serious injuries.
•
Keep children and other unauthorised persons away from the working area.
•
Do not allow children to play with the tool or its packing.
•
Be careful when working on hot engines – risk of burn!
•
Remove the negative battery connection before repairing, so you avoid short circuits and that the
engine will not start unintentionally.
•
This manual is just brief information and will not replace a garage handbook.
•
Always consult specific service literature for information about torques, assemblies and
disassemblies etc.
•
After any successful maintenance and before starting the engine, you should rotate the engine for
two turns manually to check the new control time.
•
Turn the crankshaft in the normal direction (clockwise unless stated otherwise) and only at the
crankshaft itself, never turn the crankshaft by turning camshaft or another wheel.
USE
Balancer Shaft Locking Pin (1)
insert this tool into the bore
provided for this purpose
and fix the tool with a screw
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
1
Balancer Shaft Tool for BMW N20
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9442
Chain Sprocket Holder (2)
place the tool on the sealing surface,
slide the pins on the holder
into the sprocket holes
and fix the tool with the screws (3)
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
