Edenwood 969189 Instrucciones De Uso página 42

B
Product usage
Attach the leg B to the foot A using the 32mm bolts L (x2) and nuts M (x2). Tighten with
an adjustable spanner to secure the nuts into place. Repeat to assemble the other leg.
On the T-bracket C there are 4 holes that enable you to assemble the stand at different
heights. Choose the desired height and then align the holes on the leg B with the T-bracket
C and the panel G. Insert the 32mm bolts J (x2) and screw in until they are securely
fastened into place. Repeat to attach the other side.
Attach the keyboard support platform D onto the T-bracket C using the 32mm bolts J
(x4). Place the keyboard E onto the keyboard support platform D and secure into place
using the 25mm bolts K (x2).
Slot the music stand F into the slots on the top of the keyboard E.
Connections
IMPORTANT! Make sure the keyboard is turned off before connecting it to external
devices. Once the external device is connected, make sure the volume on the
external device is low, then turn on the power.
Headphones (not provided)
• Plug the headphones jack into the PHONES/OUTPUT socket on the back of the keyboard.
The keyboard speakers will automatically turn off when the headphones are connected.
NOTE: Hearing loss can occur if music is played too loud for prolonged periods
of time.
Microphone (provided)
Use the microphone to sing along while you play the keyboard.
• Plug the microphone jack into the MIC socket.
• Move the microphone nearer to you to increase the volume and further away to decrease
the volume.
Computer, mobile phone and MP3 player
• Plug the 3.5mm jack into the AUDIO INPUT socket and plug the other end into the external
device (cables not provided).
• Control the volume through the external device.
USB
• Insert the USB stick (maximum memory 32GB) into the USB port to play MP3 tracks. The
LED screen will display USb.
• Refer to the OPERATIONS section for how to playback the MP3 tracks.
41 EN