Duronic FH2KW1 Manual De Instrucciones página 7

• In order to avoid overheating, do not cover the heater. To prevent a
possible fire hazard, do not block the air intakes or the outlet in any way.
• Ensure the appliance is always switched off before connecting it to the
mains power supply.
• Switch off the power supply and unplug the appliance whenever it is not in
use, before cleaning it or carrying out any maintenance.
• This heater must not be located immediately below a mains plug socket.
• To disconnect the appliance, switch it "OFF", and then remove the plug
from the socket.
• Do not pull the cable to unplug it.
• Do not operate in areas where petrol, paint or other flammable liquids are
used or stored.
• Do not touch the hot surfaces.
• Do not leave this appliance unattended when it is in use.
• The most common cause of overheating is deposits of dust or fluff in the
appliance. Ensure these deposits are removed regularly by disconnecting
the appliance and then vacuum cleaning the air vents and grills.
• Place the cable in such a way that it is not in any high traffic area to avoid
it being tripped over or stood on.
• Do not put the heater away until it has cooled down completely. Store the
heater in cool dry location when not in use.
• This product is only suitable for well insulated spaces or occasional use.
• Remember, portable electric heaters are designed for spot heating, or as a
supplementary heat source. They are not intended to be main sources of
heat.
7