Battery Level Display; Operation; Switching On And Off; Setting The Penetration Depth Of The Engraving - Parkside PAGG 4 A1 Manual De Instrucciones

Battery level display

The battery level display 2 indicates the charge level using 2
coloured LEDs .
Green LED
The battery is charged .
Red LED
The battery is flat . Recharge it .

Operation

Never use the appliance for purposes other than those for which it
was designed and only with original parts/accessories . Using
attachments or accessory tools other than those recommended in the
operating instructions can lead to a risk of injury .

Switching on and off

Switching on
♦ Press and hold the ON/OFF switch 1 .
Switching off
♦ Let go of the ON/OFF switch 1 .

Setting the penetration depth of the engraving

Use the +/– speed control buttons 4 to set the penetration depth
of the engraving . A low setting is usually sufficient for the most
common applications .
♦ Press the + speed control button 4 to increase the penetration
depth .
♦ Press the – speed control button 4 to decrease the penetration
depth .
PAGG 4 A1
GB │ IE │ 13 ■