Technoline WS9470 Manual De Instrucciones página 12

Calibration of the humidity and temperature display
Press and hold the SET button for 3 seconds and the humidity flashes. Press the ▲ or
▼button to correct the display of the humidity. CALIBRATED appears under humidity on
the display.
Press SET button shortly to confirm the changes and the temperature flashes. Press the
▲ or ▼buttong to correct the display of the temperature. CALIBRATED appears under
temperature on the display.
Press SET button shortly to confirm the changes and exit the setting mode.
Note: CALIBRATED is shown on the display as long as the values stay calibrated.
Low battery icon
Change the batteries once the battery symbol appears on the display.
Precautions
This unit is intended to be used only indoors.
EN5