General Safety Information For Power Tools - Grizzly Tools EHS 600-61 R Traducción Del Manual De Instrucciones Original

Information of the acoustic power
100
level L in dB.
WA
Safety class II
Machines are not to be place with
domestic waste.
General Safety Information for
Power Tools
WarnIng! Read all safety infor-
mation and instructions. Failure
to adhere to the safety informa-
tion and instructions may result in
electric shock, fire and/or serious
injuries..
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Keep all safety information and in-
structions for future reference.
Work area safety
• Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents.
• Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of flammable Iiquids, gas-
es or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away
•
while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
CAUTION! The following states
how to avoid accidents and injuries
due to electric shock:
Power tool plugs must match the
•
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and match-
ing outlets will reduce risk of electric
shock
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
Do not expose power tools to rain
•
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use
the cord for carrying, pulling or un-
plugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entan-
gled cords increase the risk of electric
shock.
• When operating a power tool out-
doors, use an extension cord suit-
able for outdoor use. Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
If operating a power tool in a damp
•
location is unavoidable, use a resid-
ual current device (RCD) protected
supply. Use of an RCD reduces the
risk of electric shock.
• Where possible, connect the equip-
ment only to a plug socket with a leak-
age-current-operated circuit breaker
(RCD), with a rated current of not
more than 30 mA.
• If the power cable for this equipment
is damaged, it must be replaced with a
special power cable, which is available
from the manufacturer or a customer
service agent of the same.
GB
57