Technoline WS 6448 Manual De Instrucciones página 7

Manual time setting:
Press and hold down the "MODE" button for 2 seconds, the Year display 2012 starts to flash. Now use "▲" and "▼"
buttons to set the correct year.
Press "MODE" to confirm your setting, the Month display starts to flash. Now use "▲" and "▼" buttons to set the correct
month.
Press "MODE" to confirm your setting, the Date display starts to flash. Now use "▲" and "▼"buttons to set the correct
date.
Press "MODE" to confirm your setting. Now use "▲" and "▼"buttons to set month/day or day/month.
Press "MODE" to confirm your setting, the language selection for the Week day displays starts to flash. Now use "▲" and
"▼"buttons to select a language. There are 7 languages of Weekday: English, German ,Italian, French, Spanish, Dutch
and Danish
Press "MODE" to confirm your setting, the Time zones start to flash, Now use" ▲" and "▼" buttons to set a correct time
zone (-12 to +12). (Germany 0 / UK -1)
Press "MODE" to confirm your setting, the 12/24 hour mode display starts to flash. Now use "▲" and "▼ "buttons to set
The correct 12/24 hour mode.
Press "MODE" to confirm your setting, the Hour display starts to flash. Now use "▲" and "▼"buttons to set the correct
hour.
Press "MODE" to confirm your setting, the Minut e displays starts to flash. Now use "▲" and "▼"buttons to set the correct
minute.
Press "MODE" to confirm your setting and to end the setting procedures, enter the clock mode.
Note:
After 7 seconds without pressing any button, the clock switches automatically from set mode to normal time mode.
Setting the daily alarms:
Press and hold down the ALARM button for 2 seconds until the Hour dis play of the alarm time starts to flash. Use the "▲"
and "▼"buttons to set the required hour. Press ALARM button to confirm your setting
The minute display of the alarm time starts to flash. Use the "▲" and "▼"buttons to set the required minute.
ALARM button to confirm your setting and to end the setting procedure .
To activate or deactivate the daily alarms, press the "ALARM" button once. The alarm is activated when the bell symbol is
displayed.
Note:
After 7 seconds without pressing any button the clock switches automatically from setting mode to normal clock mode.
The alarm will sound for 1 minute if you do not deactivate it by pressing any button. In this case the alarm will be
repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 1 minutes) changes the volume 4 times whilst the alarm signal is heard.
Automatic SNOOZE function:
To activate the automatic snooze function: While the alarm is sounding, press the "SNOOZE/LIGHT" button to activate
the snooze function. When the snooze function is activated, the " Zz" symbol appears in the dis play.
The alarm will sound again 5 minut es later.
°C/°F temperature display:
The temperature is displayed either in °C or °F. Press the"▼"button to switch between °C or °F display.
Connection to outdoor sensor:
Press and hold down the "▼" button for 2 seconds to search for outdoor sensors (to eras e the current data inside the
clock).
Backlight:
Press the SNOOZE/LIGHT button to activate the display lighting for 5 seconds , if the indoor station is battery powered.
Weather forecast
GB 3