Cleaning - Biochef Nova Manual Del Usuario

Cleaning

After you finish your blending session, you can clean the jug in various ways
depending on the ingredients you have used.
You can rinse the jug and lid directly under the tap and use a clean cloth to
wipe up the residual water.
Always place jug in upright position when leaving to dry. Try not to have liquid
contacting the underside of the drive shaft.
Thick or oily residue
• Pour warm water with a few drops of dish washing liquid and select the
pulse button. Repeat until most of the residue has been removed from
around the blade assembly and jug sides.
• Rinse the jug and lid under the tap directly and wipe up the residual water
with a dry cloth.
• Wipe the base with a clean and soft cloth. Please make sure the blender is
unplugged before cleaning!
EN
9