Troubleshooting - Biochef Nova Manual Del Usuario

Troubleshooting

EN
When the
jug is on the
base and the
control panel
does not light
up.
Ingredients
are difficult to
blend
Motor stops
suddenly
during
operation.
8
1. Not plugged into electricity. Replug cord into power
outlet.
2. Electricity not turned on. Check switch is turned to
ON position.
Too many solid ingredients. Add more liquid
1. Too much food may cause motor to cut out. Turn
off. Remove some of the food and power up
again.
2. Long durations of operating or adding too much
hard food may trigger the protection mechanism,
causing the motor to stop. Rest the blender for 20
– 45 minutes and restart it.
3. Voltage shortage. The power voltage is
unmatched or insufficient for the blender. Make
sure the power supply is correct.
4. Adding too much food takes the working current
beyond the preset maximum. Rest the blender for
20 – 45 minutes and restart it.