Connecting To A Macintosh Computer; Setup 2: Connect The Power Cord - Sony SDM-S53 Manual Del Usuario

x Connecting to an IBM PC/AT or compatible
computerp
to the computer's HD15 output
connector (analog RGB)
IBM PC/AT or
compatible computer
x Connecting to a Macintosh computer
to the computer's
HD15 output connector
(analog RGB)
Macintosh computer
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
to the HD 15
input connector
(analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)
to the HD 15
input connector
(analog RGB)
HD15-HD15 video
signal cable (analog
RGB) (supplied)

Setup 2: Connect the power cord

1
Connect the supplied power cord securely to the
monitor's AC IN connector.
2
Connect the other end securely to a power outlet.
SDM-S53/S73
2
to a power outlet
power cord (supplied)
The illustration of the back of the monitor show here is that
of the SDM-S53.
The same applies for the SDM-S73 model.
SDM-S93
1
to AC IN
2
to a power outlet
power cord (supplied)
1
to AC IN
7
GB