Setup; Step 1: Connect Your Monitor To Your Computer; Connecting To A Second Computer - Sony CPD-G520 Manual De Instrucciones

Setup

Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Video signal cable (1)
• Warranty card (1)
• Notes on cleaning the screen's surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Notes
• Do not touch the pins of the video signal cable connector as this might
bend the pins.
• When connecting the video signal cable, check the alignment of the
HD15 connector. Do not force the connector in the wrong way or the
pins might bend.
x Connecting to an IBM PC/AT or compatible
computer
AC IN
to video output
IBM PC/AT or compatible
computer
6
2 1
to HD15
video signal cable
(supplied)
x Connecting to a Macintosh or compatible
computer
You will need a Macintosh adapter (not supplied).
AC IN
Macintosh adapter
(not supplied)
to video output
Macintosh or compatible computer
x Connecting to a second computer
AC IN
Refer to the preceding
examples to connect your
computer.
2 1
to HD15
video signal cable
(supplied)
2 1
to HD15
video signal cable
(not supplied)