Switching Input Signals; Downloading Software; Setting Up The Internet Connection - BenQ RP654K Manual Del Usuario

26 Basic operations

Switching input signals

To select an input signal do either one of the following:
• Press the INPUT button on the remote control.
• Press the Menu button on the front panel.
• Drag the General Setting menu up from the bottom-center of the screen.
The users can enable the Eye Care and PIR Sensor function on the OSD menu.
• Eye Care switches the display low blue light mode and activates the flicker free function. In
Eye Care mode, the default value of Brightness and Contrast both are 50 and the default
value of Backlight is 100.
• The PIR Sensor allows you to sense motion.

Downloading software

BenQ may periodically release software updates that may add functions or applications
associated with your display. To check if there is a software update available for your
device or to obtain the software license key, please visit http://DSdownload.BenQ.com.
Then enter the serial number (can be found on the sticker attached on the back of the
display) and click OK to access the Software download page.

Setting up the Internet connection

Your display must be connected to a network to conduct OTA updates or surf the
Internet.
To find the MAC address in Android OS, please go to Setting > Network > Status.