Westfalia 307373600001 Instrucciones De Montaje página 2

SIARR
08 - 83
PREPARATION
* Remove the rear bumper.
ASSEMBLY
* Position the arms C and D in the longitudinal
and fix them in place using fastening kit Z.
* Position the tow bar crosspiece A between arms
C and D and fix it in place using fastening kit X.
* Below the bumper, in the centre, make a cut in
line with that shown in the diagram opposite.
* Fasten the tow bar head B using fastening kit Y
and tighten it to the torques stipulated below.
FINISHING
* Tighten all nuts, bolts and screws to
the torques stipulated.
* Refit the bumper.
FASTENING KIT
4 off HM10x35 screws
X
4 off 10/34 plain washers
4 off DEC10 washers
4 off HM16x45 screws
Y
4 off DEC16 washers
4 off HM16 nuts
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
2 off 10/34 plain washers
Z
2 off DEC10 washers
2 off HM10 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALI\NDM0883-D - FOLIO NDMANGLAIS
Type Type
Approval No.
Attelage pour
Fiesta depuis e11*94/20*00*4237
modèle 2002
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
307373600001
Max. Total Max. Total Max. Verti-
Authori. Weight Towable Weight
cal load
1 570 kg 900 kg
Value
D
50 kg 5,62 kN