Input, Output And Control Section - dB Technologies SUB 915 Manual Del Usuario

INPUT, OUTPUT AND CONTROL SECTION

RDNet
8
Balanced
1 Audio
5
Subwoofer
Polarity
1. INPUT
XLR (balanced) input connector. For further details concerning connection, refer to INPUT CONNECTIONS AND
AUDIO DAISY CHAIN.
2. OUTPUT
XLR (balanced) output connector. Select the cut-off frequency based on the Xover/Link mode using the
relevant rotary control. For further details concerning connection, refer to INPUT CONNECTIONS AND AUDIO
DAISY CHAIN.
3. Input Sensitivity
Rotary control to adjust the input sensitivity.
4. Xover/Link rotary
Selector that allows setting the cut-off frequency based on the selected mode (Link/Xover). It acts on the
daisy-chained signal from Xover/Link Output connectors.
5. Subwoofer Polarity selector
Selector that allows adjusting the Polarity (Normal or Reverse)
6. LED (Limiter, Signal/ON)
Indicator LEDs. The Limiter LED turns on when the internal protection circuit is triggered, while Signal/ON
indicates subwoofer power-up as well as the presence of an input audio signal.
SUB 915 - SUB918
22
Data Data
In Out
P P U U S S H H P P U U S S H H
Input Output
Xover/Link
P P U U S S H H
Normal Reversed
2
IN ITALY
DESIGNED & DEVELOPED
Link Active Remote
Preset
Active
Subwoofer
Service/
Limiter
0
Delay
User
1,0
[ms]
Signal
1,5
4,5
4,0
2,0 Status
3,5
2,5
3,0
ON
Xover/Link [Hz]
90
Xover
80 100
MODE
70
110
70
110
Link
80
100
90
MODE
4 7
English
9
USB Data
Service
6
Main
Input
3
Sens.
0dB
max
Code 420120322 REV. 1.0