Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Drill pilot holes using a 7/32 in. (5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the studs.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4.
Install wall plate assembly
wall plate.
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement
of the wall plate
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
15
3
14
using four lag bolts
17
and four washers
15
3 in. (75 mm)
7/32 in.
(5.5 mm)
.
14
. Tighten the lag bolts only until they are pulled firmly against the
16
4
15
16
17
9
Publicidad
