Bs128Hdr - HOLZMANN MASCHINEN BS 115 Manual De Instrucciones

13.2 BS128HDR

The BS 128HDR assembled ready in principle.
You only need to assemble the undercarriage.
To mount the first wheels.
After that, the base must be assembled (fitting in with the chassis).
HOLZMANN MASCHINEN GmbH
8. correctly place the belt pulleys with keyway on the
shafts with grub screw on the flattened area. Tighten
both belt pulleys with the grub screws. The belt (4) is
mounted and the motor position/belt tension is
tightened by means of the screw (5).
9. fasten screw, washer, circlip (1) to the belt box (screw
plug for belt cover)
10. wheels (1) are placed on the wheel axle (2) and
secured with a nut (3).
1. Slide the guide bar with end stop into the base and
tighten with the grub screw.
www.holzmann-maschinen.at 41
BS115 / BS128HDR