Sony KD-65AG8 Información De Instalación página 10

Note
 We recommend you to check the
position of TV in the viewing
environment.
2
406 mm
3
Align
WM1
make four marks aligned with
the studs.
WM1
Note
 Use a level to check whether
4
Drill upper pilot holes on the
marks.
Note
 Be sure to drill into the centre of wood stud.
 Pilot holes must be drilled to a depth of 75 mm, using
a 5.5 mm diameter drill bit.
5
Install
suitable screws (not supplied)
and washers (not supplied).
Note
 Use a level to check whether
Precaution
 Do not over-tighten wooden screw 8 mm × 60 mm.
Improper tightening could reduce the holding power
of wooden screw 8 mm × 60 mm.
− 10 (GB) −
to the wall and
WM1
on the wall using
WM1
8 mm × 60 mm
WM1
is level.
75 mm
5.5 mm
is level.