Appendix A - Setting Of The Operation Speed - COMEM RDR-MK Manual De Instrucciones

Appendix A – Setting of the operation speed
Main tools
Description
A Flathead screwdriver
B Key for hexagonal nuts size 13
Main tools
Action description
1 Remove the protection (item 5 in fig.2)
2 With the key n.13 (tool B) unscrew a little the
locking nut in order to release the regulation screw.
3 With the flathead screwdriver (tool A) srew or
unscrew the regulation pin in order to put the
indicator on the desired position
(according to the diagram in fig.3)
4 With the key n.13 (tool B) screw the locking nut in
order to block the regulation screw.
Pay attention not to move the regulation screw.
5 Screw the protection on the flow governator.
Table 3
Pictures
Tool Pictures/Notes
B
A
B
7