Avintage DIVA R600A Instrucciones De Uso página 60

•
Start by loading the lower part of your wine cellar.
•
Then simply stack the bottles with their bases facing backward in the back row and conversely for the
front row. The wine bottle trays are to be arranged according to the size of your wine cellar and the
shapes of your wine bottles.
IMPORTANT : Make sure that the bottles do not come in contact with the inner cabinet's back
wall.
If you have a large number of bottles, we recommend that you load 40 bottles at a time and then let the
device run for 12 hours before you load another 40 bottles. Repeat this operation as many times as
necessary in order to create a thermal mass in your wine cellar.
Additional wine bottle shelves are available on a paying basis from the after-sales service of your retailer or
via our Internet site www.climadiff.com
(only for wood wine bottle shelves).
As for metal wine bottle shelves, they are only available on a paying basis from the after-sales service of
your retailer.
COMPLIANCE WITH MAXIMUM LOADS
The limit load per shelf must comply with indication.
Do not exceed the designated maximum capacity (warning: do not obstruct the activated charcoal filter).
The wine bottle shelves are to be arranged according to the size of your wine cellar and the shapes of your
wine bottles.
Fixed wine bottle shelves: 68 kg (approximately 52 bottles, 4 levels of 75 cl bottles by shelf maximum)
Sliding wine bottle shelves: 25 kg (approximately 15 bottles)
These are maximal loading values. Any obligation to load the maximum of bottles indicated per shelf. You
can also load without any shelf.
under the heading "accessories" or else via www.vinokado.com
60