Service And Repairs; Warning Label - Metabo HPT NR 83A5 Instrucciones Y Manual De Seguridad

English
<NR83AA5>
Magazine
Nail Feeder Ass'y
3. Storing
When not in use for an extended period, apply a
thin coat of the lubricant to the steel parts to avoid
rust.
Do not store the Nailer in a cold weather
environment.
Keep the Nailer in a warm area.
When not in use, the Nailer should be stored in a
warm and dry place.
Keep out of reach children.

4. WARNING LABEL

Do not use the Nailer with missing or damaged
WARNING LABEL.
A new WARNING LABEL is available from a
metabo HPT authorized service center.
5. Maintenance chart (See page 25)
6. Operator troubleshooting (See page 25)
24
000Book̲NR83A5̲US̲metabo.indb 24 000Book̲NR83A5̲US̲metabo.indb 24
7. Service parts list
CAUTION
1
Disconnect
air hose
MODIFICATIONS:
Metabo HPT Power Tools are constantly being improved
and modifi ed to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without prior
notice.

SERVICE AND REPAIRS

All quality Nailers will eventually require servicing or
replacement of parts because of wear from normal use.
NOTE: Specifi cations are subject to change without any
Warning
Label
Repair, modifi cation and
metabo HPT Power Tools must be carried out by
a metabo HPT Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the metabo HPT Authorized
Service Center when requesting repair or other
maintenance. In the operation and maintenance
of power tools, the safety regulations and
standards prescribed in each country must be
observed.
WARNING
Only service personnel
metabo HPT, distributor or employer shall
repair the Nailer.
Use only parts supplied or recommended by
metabo HPT for repair.
obligation on the part of metabo HPT.
inspection of
trained by
2018/05/22 13:58:57 2018/05/22 13:58:57