Selecting The Search Method; Searching Every 10 Tracks In The Current Disc; Using Disc Title Functions; Entering Disc Titles - Pioneer DEH-P9600MP Manual De Instrucciones

Built-in CD Player
1 Press FUNCTION to select Compression.
Press FUNCTION until Compression appears
in the display.
2 Press a or b to select your favorite set-
ting.
Press a or b repeatedly to switch between the
following settings:
COMP/BMX OFFCOMP 1COMP 2
COMP/BMX OFFBMX 1BMX 2

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Press FUNCTION to select Search mode.
Press FUNCTION until Search mode appears
in the display.
2 Press c or d to select the search meth-
od.
Press c or d until the desired search method
appears in the display.
! FF / REV  Fast forward and reverse
! Rough search  Searching every 10
tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method Rough search.
Refer to Selecting the search method on this
page.
All manuals and user guides at all-guides.com
2 Press and hold c or d to search every
10 tracks on a disc.
# If a disc contains less than 10 tracks, pressing
and holding d recalls the last track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding d recalls the last track of the
disc.
# If a disc contains less than 10 tracks, pressing
and holding c recalls the first track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding c recalls the first track of the
disc.

Using disc title functions

You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD will be
displayed.

Entering disc titles

Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
1 Play the CD that you want to enter a
title for.
2 Press OPEN to open the front panel.
3 Press FUNCTION and hold until
Title input appears in the display.
# When playing a CD TEXT disc, you cannot
switch to Title input. The disc title will have al-
ready been recorded on a CD TEXT disc.
4 Press button 1 to select the desired
character type.
Press button 1 repeatedly to switch between
the following character types:
Section
06
27
En