Playing Tracks In A Random Order; Scanning Cds And Tracks; Pausing Cd Playback - Pioneer DEH-P9600MP Manual De Instrucciones

Section
08 Multi-CD Player
2 Press c or d to select the repeat range.
Press c or d until the desired repeat range ap-
pears in the display.
! Magazine repeat  Repeat all discs in the
multi-CD player
! Track repeat  Repeat just the current
track
! Disc repeat  Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to
Magazine repeat.
! If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Disc repeat.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range,
Magazine repeat and Disc repeat.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select
Random mode.
Press FUNCTION until Random mode ap-
pears in the display.
3 Press a to turn random play on.
The light comes on. Tracks will play in a ran-
dom order within the previously selected
Magazine repeat or Disc repeat ranges.
# To turn random play off, press b.
38
En
All manuals and user guides at all-guides.com

Scanning CDs and tracks

While you are using Disc repeat, the begin-
ning of each track on the selected disc plays
for about 10 seconds. When you are using
Magazine repeat, the beginning of the first
track of each disc is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select Scan mode.
Press FUNCTION until Scan mode appears in
the display.
3 Press a to turn scan play on.
The light comes on. The first 10 seconds of
each track of the current disc (or the first track
of each disc) is played.
4 When you find the desired track (or
disc) press b to turn scan play off.
The light goes off. The track (or disc) will con-
tinue to play.
# If the display has automatically returned to
the playback display, select Scan mode again by
pressing FUNCTION.
Note
After track or disc scanning is finished, normal
playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.