Initial Settings; Adjusting Initial Settings; Selecting The Display Language; Setting The Clock - Pioneer DEH-P9600MP Manual De Instrucciones

Initial Settings

Adjusting initial settings

1
Initial settings lets you perform initial setup of
different settings for this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press OPEN to open the front panel.
3 Press FUNCTION and hold until function
name appears in the display.
4 Press FUNCTION to select one of the in-
itial settings.
Press FUNCTION repeatedly to switch be-
tween the following settings:
Language select (language selection)Clock
(clock)AUX (auxiliary input)Dimmer
(dimmer)Brightness (brightness)
Digital ATT (digital attenuator)Mute (tel-
ephone muting/attenuation)
FM tuning step (FM tuning step)
Auto PI seek (auto PI seek)
Warning tone (warning tone)
Face auto open (flap auto open)
Hands free (hands-free telephoning)
SRC off standby (telephone standby)
Demonstration (feature demo)
Reverse mode (reverse mode)Ever-scroll
(ever scroll)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
All manuals and user guides at all-guides.com
# You can also cancel initial settings by holding
down FUNCTION until the unit turns off.
# When the hands-free telephoning is
Hands free OFF, you can select Mute.
# When the hands-free telephoning is
Hands free ON, you can select
SRC off standby.

Selecting the display language

This unit allows you to select the display lan-
guage.
1 Press FUNCTION to select
Language select.
Press FUNCTION repeatedly until
Language select appears in the display.
2 Press c or d to select the language.
Each press of c or d selects languages in the
following order:
EnglishFrançaisItalianoEspañol
DeutschNederlands

Setting the clock

Use these instructions to set the clock.
1 Press FUNCTION to select Clock.
Press FUNCTION repeatedly until Clock ap-
pears in the display.
2 Press c or d to select the segment of
the clock display you wish to set.
Pressing c or d will select one segment of the
clock display:
HourMinute
As you select segments of the clock display
the segment selected will be highlighted.
Section
10
59
En